Devices and sensors

SC-OW-025-3 Sensor of alternating current 25A, three phases

End of sales, on support


Загрузка изображения

Three phase current sensor allows to perform monitoring in real time. Each of the three channels is connected in the breaking of the electrical circuit of power supply. Nominal measured current – 25A, maximum measured current – 50A.


Three phase current sensor allows to perform monitoring in real time. Each of the three channels is connected in the breaking of the electrical circuit of power supply. Nominal measured current – 25A, maximum measured current – 50A.

The sensor constantly measures on each of the three channels, storing the results in its own random access memory. When the sensor data is polled, the latest results of the measurements are sent to the controller. This reduces the duration of the complete procedure of polling and obtaining of the values by the controller to a few tens of milliseconds. Each of the three channels can be polled individually.

Accuracy of the data during transmission from the sensor to the controller is ensured by the CRC algorithm (cyclic redundancy check), which protects data even in environments with high influence of the electromagnetic fields.

During the digital bus survey procedure carried out by the controller, the sensor announces to the controller each of the three channels as independent "virtual" sensors. A command is available that allows the controller to request the name of the sensor and the measurement units, allowing to reduce the setup of the sensor in the controller by pushing a few buttons on the interface.

CONTACTS

  • Our Address: Ukraine, Kyiv 02660
    str. Chervonotkatska 94
  • Email: office@xcs.com.ua
  • Web-site: impulse112.com
    xcs.com.ua
  • Phone number: +38 044 451 87 42