Devices and sensors

SC-OW-200-1 Sensor of direct current 200А, single phase

End of sales, on support


Загрузка изображения

Single phase current sensor allows to perform monitoring in real time. The measurement channel is connected in the breaking of the electrical circuit of power supply. Nominal measured current – 150A, maximum measured current – 200A.


Single phase current sensor allows to perform monitoring in real time. The measurement channel is connected in the breaking of the electrical circuit of power supply. Nominal measured current – 150A, maximum measured current – 200A.

It is implied that the contacts of the measuring channel are tied up with bolts to a DIN-rail mounted terminal.

The sensor constantly measures on the channel, storing the results in its own random access memory. When the sensor data is polled, the latest results of the measurements are sent to the controller. This reduces the duration of the complete procedure of polling and obtaining of the values by the controller to a few tens of milliseconds. Each of the three channels can be polled individually.

Accuracy of the data during transmission from the sensor to the controller is ensured by the CRC algorithm (cyclic redundancy check), which protects data even in environments with high influence of the electromagnetic fields.

A command is available that allows the controller to request the name of the sensor and the measurement units, allowing to reduce the setup of the sensor in the controller by pushing a few buttons on the interface.

CONTACTS

  • Our Address: Ukraine, Kyiv 02660
    str. Chervonotkatska 94
  • Email: office@xcs.com.ua
  • Web-site: impulse112.com
    xcs.com.ua
  • Phone number: +38 044 451 87 42